SS316 HIGH PRESSURE BALL VALVE (M X F) 10000PSI.
Valve Features
- Manufactured from high integrity barstock material SS 304L/ SS 316
- Two piece and flexible Body
- Low torque and smooth 90o
- Bi-directional floating ball design which ensure leak- proof shut-off on pressure or vacuum.
- Anti-blow out stem with shoulder design (internally Loaded) for safety and seal
- Temperature rating -50oC to
- Pressure rating up to 10000
- Full material
- 100% hydrostatically
- Handle indicates open/ close
- Available NPT or BSPP thread end
SS316 MANIFOLD 2 WAY R-TYPE (FEMALE X FEMALE) 6000PSI.
Valve Features
- Maximum working pressure 6000PSI at 100oF( 38oC)
- Working Temperature -65oF(-54oC) to 356oF(180oC)
- Non rotating stem design reduce galling and provide ex- cellent seal on seat
- Stem threads are rolled and lubricated to prevent galling and reduces operating torque
- PTFE packing is standard and for higher temperature ap- plication Graphoil is used
- Gland packing can be adjusted to extend the valve
- Back seat stop stem for blowout prevention
- Bonnet lock pin prevents accidental removal while in op- eration
- Low Torque operating T bar Handle
- 100% Quality Tested
- Full Material Traceability
- Hydro test performed @ of 5 times of working pressure
- Protective Dust cap provided to prevent contaminants entry
- Sour gas service conforms to NACE MR0175 is optional
SS316 MANIFOLD 3 WAY T-TYPE (FLANGE X FEMALE X FEMALE)
Valve Features
- Maximum working pressure 6000PSI at 100oF( 38oC)
- Working Temperature -65oF(-54oC) to 356oF(180oC)
- Non rotating stem design reduce galling and provide ex- cellent seal on seat
- Stem threads are rolled and lubricated to prevent galling and reduces operating torque
- PTFE packing is standard and for higher temperature ap- plication Graphoil is used
- Gland packing can be adjusted to extend the valve
- Back seat stop stem for blowout prevention
- Bonnet lock pin prevents accidental removal while in op- eration
- Low Torque operating T bar Handle
- 100% Quality Tested
- Full Material Traceability
- Hydro test performed @ of 5 times of working pressure
- Protective Dust cap provided to prevent contaminants entry
- Sour gas service conforms to NACE MR0175 is optional
SS316 NEEDLE VALVE (FEMALE X FEMALE) 10000PSI. & 6000PSI.
Maximum working pressure:
3000 psi (207 bar) at 100°F (38°C)
6000 psi (414bar) at 100°F (38°C)
Working temperature:
-22°F (-30°C) to 392°F (200°C)
-65°F (-54°C) to 842°F (450°C)
PTFE packings can be adjusted to extend the valve life.
Stem threads are rolled and lubricated to prevent galling and reduce operating torque.
Optional sour gas service conforms to NACE Mr0175.
Hydro test performed with pure water at 1.5 times of working pressure.
100% factory test
Bonnet Lock pin Prevents accidental Removal while in service.
Material : A479 304, A479 316, A182 GRF 316, Monel, Hastelloy, Inconel