SS316 BLOCK & BLEED 2 WAY (FEMALE X FEMALE) 10000PSI. & 6000PSI.

Valve Features

Maximum working pressure 6000PSI at 100oF( 38oC)
Working Temperature -65oF(-54oC) to 356oF(180oC)
Non rotating stem design reduce galling and provide ex- cellent seal on seat
Stem threads are rolled and lubricated to prevent galling and reduces operating torque
PTFE packing is standard and for higher temperature ap- plication Graphoil is used
Gland packing can be adjusted to extend the valve
Back seat stop stem for blowout prevention
Bonnet lock pin prevents accidental removal while in op- eration
Low Torque operating T bar Handle
100% Quality Tested
Full Material Traceability
Hydro test performed @ of 5 times of working pressure
Protective Dust cap provided to prevent contaminants entry
Sour gas service conforms to NACE MR0175 is optional

Valve Features

Maximum working pressure 6000PSI at 100oF( 38oC)
Working Temperature -65oF(-54oC) to 356oF(180oC)
Non rotating stem design reduce galling and provide ex- cellent seal on seat
Stem threads are rolled and lubricated to prevent galling and reduces operating torque
PTFE packing is standard and for higher temperature ap- plication Graphoil is used
Gland packing can be adjusted to extend the valve
Back seat stop stem for blowout prevention
Bonnet lock pin prevents accidental removal while in op- eration
Valve designed for mount pressure gauges, pressure transmitters etc. and save cost, space and weight sig- nificantly
Low Torque operating T bar Handle
00% Quality Tested
Full Material Traceability
Hydro test performed @ of 5 times of working pressure
Protective Dust cap provided to prevent contaminants entry
Sour gas service conforms to NACE MR0175 is optional

Valve Features

Maximum working pressure 6000PSI at 100oF( 38oC)
Working Temperature -65oF(-54oC) to 356oF(180oC)
Non rotating stem design reduce galling and provide ex- cellent seal on seat
Stem threads are rolled and lubricated to prevent galling and reduces operating torque
PTFE packing is standard and for higher temperature ap- plication Graphoil is used
Gland packing can be adjusted to extend the valve
Back seat stop stem for blowout prevention
Bonnet lock pin prevents accidental removal while in op- eration
Low Torque operating T bar Handle
100% Quality Tested
Full Material Traceability
Hydro test performed @ of 5 times of working pressure
Protective Dust cap provided to prevent contaminants entry
Sour gas service conforms to NACE MR0175 is optional

Sl. Description Material Quantity No. No.
1	Valve Body	SS 316L	1
2	Gland Body	SS 316L	2
3	Gland Retainer	SS 304	2
4	Gland Packing	PTFE	4
5	Check Nut	SS 304	2
6	Stem	SS 316L	2
7	Trim	SS 316L	2
8	Handle	SS 304	2
9	Allen Bolt	SS 304	2
10	Lock Pin	SS 304	2
11	Dust Cap	PE	2

Reviews